How much sample material should I send?

For optimal measurements, the recommended sample quantities are:

30-50 mg of sample material is typically recommended
It's better to provide slightly more material, especially for samples that are statically charged, as this makes loading easier

Requirements:

It is possible to work with less than 30 mg, but the sample wells must be completely filled
For low-density samples, even 10–20 mg might be sufficient
The critical factor is filling the sample holder wells, which are approximately 2.5 mm diameter and 1 mm thickness

It's helpful to compare your available sample volume with the pictures in the shipping instruction guide

Samples should be in powder or polycrystalline solid form
For shipping, use transparent glass or plastic containers with at least a 5 mm opening and a maximum length of 5 cm
Labels should be printed and partially placed so the contents remain visible

Remember that the samples cannot be returned after measurement, so it's advisable to send only the amount required for 1–2 measurements (just in case).

Please do not send more than 100 mg.